ยังมีอยู่ เซ็นเซอร์แสง Light Detection Light Sensing แบบ 4 ขา

ยินดีต้อนรับสู่ เช็คเช็ค.com เว็บไซต์เปรียบเทียบสินค้าบนอินเตอร์เน็ต

เซ็นเซอร์แสง Light Detection Light Sensing แบบ 4 ขา

จำหน่ายโดยร้านค้า : son_513
บนแพลตฟอร์ม : Shopee

฿20
  • จัดจำหน่ายโดยร้านค้า ช็อป99 บน Shopee
  • จัดส่งจากอำเภอเมืองฉะเชิงเทรา, จังหวัดฉะเชิงเทรา
  • จำนวนผู้ติดตามร้านค้า 2,797
  • คะแนนร้านค้า 4.9/5 คะแนน

หากคุณกำลังมองหาโคมไฟและอุปกรณ์ให้แสงสว่าง ในกลุ่มเครื่องใช้ในบ้านหรือสินค้าอื่นๆที่ใกล้เคียงกัน ร้านค้า son_513 (ช็อป99) บน Shopee จำหน่ายสินค้า เซ็นเซอร์แสง Light Detection Light Sensing แบบ 4 ขา ไปแล้วกว่า 40 ชิ้น และมีรีวิวจากผู้ซื้อกว่า 5/5 คะแนน ลองแวะเปรียบเทียบรายละเอียดสินค้าและรีวิวก่อนได้ค่ะ




รายละเอียดสินค้า

Photosensitive Resistor Sensor Module Light Detection Light Sensing แบบ 3 ขา
Uses:
light brightness detection, light brightness sensor, smart car light seeking module
Module features: 1, using sensitive photoresistor sensor
2, comparator output, clean signal, good waveform, strong driving ability, more than 15mA.
3, with adjustable potentiometer can adjust the detection light brightness
4, working voltage 3.3V-5V
5, output form: DO digital switch output (0 and 1) and AO analog voltage output
6, with fixed bolt holes, easy to install
7, small board PCB size: 3.2cm x 1.4cm
8, using wide voltage LM393 comparator
module instructions
1, photosensitive resistor module is most sensitive to ambient light, generally used to detect the brightness of the surrounding environment, trigger microcontroller or relay module and the like;
2, when the ambient light level module reach the set threshold value, the DO output high, when the ambient light level exceeds a set threshold value, the DO terminal output low;
3, may be associated with the DO output of the microcontroller Directly connected, through the MCU to detect high and low level, thereby detecting the change of the light brightness of the environment;
4, DO output can directly drive the store relay module, which can form a light control switch.
5, the small board analog output AO can be connected with the AD module, through the AD conversion, you can get more accurate values of ambient light intensity;
Product wiring instructions:
1, VCC connected to the power supply positive 3.3-5V
2, GND connected to the negative power supply
3, DO TTL switch signal output


รีวิวจากผู้ซื้อ

  • nat******d

    ได้ทดลองสั่งซื้อสินค้าและได้เขียนรีวิวการสั่งซื้อว่า..บริการดี ตอบข้อสงสัยรวดเร็ว ส่งของเร็วมากครับ


ข้อมูลสินค้า รายละเอียดสินค้าและรูปภาพสินค้าจากร้าน son_513 บนช้อปปี้ ก่อนการตัดสินใจซื้อสินค้า กรุณาตรวจสอบรายละเอียดสินค้าให้แน่ใจอีกครั้งในช่องทางการสั่งซื้อของผู้ขายเนื่องจากข้อมูลสินค้ารวมถึงรูปภาพสินค้าภายในเว็บไซต์นี้อาจล้าสมัยไม่อัพเดทในช่วงเวลาหนึ่ง ซึ่งผู้ขายอาจมีการปรับเปลี่ยนเงื่อนไขของสินค้าหรือข้อเสนอต่าง ๆ ไปได้ เงื่อนไขและข้อกำหนดในการคุ้มครองเมื่อสั่งซื้อสินค้าเป็นไปตามเงื่อนไขของแพลตฟอร์มนั้น ๆ เมื่อทำรายการสั่งซื้อ